The End-suction pumps have a wider bearing for a long life and for smooth operation, while the impeller wrapped design provides high efficiency and low hydraulic thrust. These pumps have a hydraulic design that provides high efficiency, low NPSH and stable characteristics. End-suction pumps are available in a wide range of materials with different sealing options and are adapted to the handling of corrosive and non-corrosive liquid substances for different applications. The modular design in this range ensures minimal spare parts handling and optimal delivery time.
End-suction pumps are also easier and faster to turn on and off because the chamber and the pipes inside the pump are always full of water, which allows the pump to always be primed. The End-suction is widely used in manufacturing company.
Application:
• Domestic water heaters
• Sprinklers / fire-fighters
• Water treatment plants
• Seawater pump
• Chemical / processing industry
• Food processing
• Irrigation
• Intended for harsh operating conditions
• Industrial use, including belt
• Drive applications.
• General water transfer in processing plants, mines, construction sites and irrigation.
End-suction Pump construction:
1. The body of the pump is fixed by the base.
2. Use the bearing cradle, which can steer the bearing, avoid radical vibrations, and improve the rigidity of the rotating part.
3. Compacted shaft, use a greased roller bearing at the deep groove
4. Connect the pump and the motor with a semi-flexible coupling
5. Use a standard portable mechanical seal.
6. TEFC motor, size according to IEC standard, type of installation B3.
Advantages of End-suction pumps
The End Suction Pumps manufacturers India offers several important advantages over other types of pumps:
Priming: They do not have to be prepared. They are primed automatically because the fluid to be pumped is fed by gravity directly to the pump, always keeping it primed.
Efficiency: End-suction pump has the main pressure of the liquid at the suction end to help it operate. You do not need to use so much energy to extract liquid in the pump and therefore it is more efficient.
Maintenance and accessibility: Since the pump is mounted outside the tank or fluid, routine maintenance is much easier to perform, since the pump can be worked immediately, unlike submersible pumps that must first be removed from the fluid. However, a method is needed to block suction and supply to allow drainage of the volute for inspection.
Flowmore Pumps 
One thought on “End Suction Pump: Application: Construction: Advantages”